- Features
- Range
- Parameter
- Adopt standard
1, fully automated. The computer draws the volume curve, the intelligent manipulator measures the thickness of the glial layer, automatically draws the upper and lower level curves and calculates the results, and greatly reduces the labor intensity and the human influence factor.
2, automatic smoke. No need to put the fume hood for testing, automatic smoke effect, reduce laboratory configuration requirements, cost savings.
3, automatic alignment. No need to manually adjust the alignment paper tube, automatic alignment accuracy, improve the reliability and stability of the test, the use of more convenient.
4, automatically take hanging weight. Automatic control to hang up and remove the weight, reduce labor intensity and operating procedures.
5, no need to take the volume sensor. To avoid forgetting to take the volume of the sensor caused by failure, improve the stability of the test.
6, safe and reliable. Silicon carbide rods and silicon carbide rods and other strong electric parts are isolated protection, circuit control weak and strong electrical equipment isolation installation, and automatically monitor the entire test process to improve the maintenance of laboratory personnel and equipment safety.
This product is automatic glial layer measuring instrument, fully automatic measurement of the entire process, and automatic smoke without the need to put into the fume hood test, automatic probe alignment paper tube, automatically hang the code and volume sensor. Reliability, more use, more convenient, can be widely used in coking, metallurgy, chemical, teaching and coal quality inspection and other departments.
1, test methods: in line with GB / T 479-2000 anthracite glial layer index determination method
2, temperature range: room temperature ~ 800 ℃
3, temperature control accuracy: 250 ℃ before the error of ± 10 ℃; 250 ℃ ~ 730 ℃ error ± 5 ℃
4, the volume sensor accuracy: 0.05%
5, the pressure sensor accuracy: 0.02% FS
6, the detector displacement accuracy: 0.02%
7, repeatability limit: Y value ≤ 20mm error is not greater than 1mm;
Y value> 20mm error is not greater than 2mm;
X value error is not greater than 3mm
8, Dimensions: 860mm (length) × 640mm (width) × 950mm (high)
9, working conditions: ambient temperature: (5 ~ 40) ℃; relative humidity: (20 ~ 85)% RH
10, power: voltage 220V ± 22V, frequency 50HZ ± 1HZ, power is not less than 5KW
11, no strong vibration around the laboratory, air, no strong electromagnetic interference and corrosive gases