Sub column

Calorimeter series

ZDHW-8000A high-precision microcomputer fully automatic calorimeter (including computer and printer)
  • Features
  • Range
  • Parameter
  • Adopt standard
  • 1.The calorimeter system can automatically measure the heat capacity of the calorimeter system.

    2.The mixer uses the original imported motor, which can mix uniformly and stably, has reliable performance and strong anti-interference ability. It can realize automatic filling, automatic adjusting of water temperature, automatic measuring of water quantity, automatic mixing and automatic ignition, reducing human error.

    3.This machine can be controlled by two devices without interference.

    4.The inner cylinder of calorimeter is stirred by electric paddle, and the outer cylinder is stirred by electric submersible, which makes the stirring more uniform and convenient.

    5.The water level indicator allows you to check the inner cylinder for water at any time.

    6.The ignition voltage and ignition current can be observed at any time, and the ignition failure reason can be judged directly.

    7.The auto cooling correction and double barrel water circulation are adopted, which has higher thermal stability and testing accuracy. The inner barrel adopts advanced foaming insulation technology, which is not affected by the external temperature during the experiment. It can analyze samples continuously for a long time, and has high cost performance.

    8.The system is controlled by a microcomputer. It can be used to input the data of sulfur, moisture, hydrogen, etc. and then to calculate and print out the calorific value of the drum, the high and low calorific value, etc. The system can automatically calculate and convert the high and low calorific value, print out the standard coal quality test report, and automatically store up to 999 pieces of data.

    9.The system can automatically complete the calibration of system energy equivalent and the measurement of heat value of substance. The calibration of system energy equivalent adopts multi-dimensional selection mode, which is flexible in real time. The measurement process and data processing of heat value of substance are completed automatically by microcomputer.

    10.Supports two ignition methods: fuse and cotton thread

    11.The measurement process is carried out by means of digital prompt and image, which is vivid and intuitive.

    12.The calorimeter can display the ignition voltage and ignition current automatically, and can detect the heat value of the lower or higher substance, and has the function of automatic diagnosis.

     

  • The high precision automatic calorimeter is mainly used in the power, coal, paper, petrochemical, cement, agriculture, animal husbandry, medicine, scientific research, teaching and other industries or departments to measure the calorific value of coal, garbage, biomass fuel, petroleum, chemical, food, wood, explosives and other solid or liquid combustible substances.


  • 1. Operating environment: 0-65℃
    2 Heat capacity precision: ≤0.1%
    3 Resolution: 0.0001℃
    4 Measurement accuracy: Complies with the requirements of GB/T 213-2008
    5 Test duration: approximately 10 minutes
    6 External water tank capacity: 75L(double tank)
    7 Inner water tank capacity: approximately 2.3 liters
    8 Ignition voltage: 24V
    9 Ignition time: 3 minutes for ignition
    10 Measurement error: Better than the national standard (<10 calories)
    11 Host power consumption: ≤ : 40W
    twelve Power supply: 220V (-15%-10%), 50Hz
    13 Host dimensions: 830mm×560mm×470mm


  • GB/T483-2007 "General Provisions for Experimental Methods in Coal Analysis"
    GB/T 30991-2014 "General Technical Conditions for Intelligent Oxygen Bomb Calorimeters"
    GB/T 213-2008 "Method for Determination of Calorific Value of Coal"
    GB/T 384-1981 "Method for Determination of Calorific Value of Petroleum Products"
    GB/T 30727-2014 "Method for Determination of Calorific Value of Solid Biomass Fuel"
    GB/ T14402-2007 "Determination of Combustion Calorific Value of Building Materials and Products"
    JC/T 1005-2006 "Method for Determining the Calorific Value of Black Raw Materials in Cement"
    JJG 672-2001 "Verification Regulation for Oxygen Bomb Calorimeters"
    ASTM D5865-2013 "Determination Method of Calorific Value of Coal and Coke"
    ASTM D5865-2007 "Standard Test Method for Total Calorific Value of Coal and Coke"
    ISO 1928-2009 "Solid Fossil Fuels - Determination of total value by elastic calorimeter and calculation of net calorific value"
    CEN/TS 14918 "Method for Determination of Calorific Value of Solid Biofuels"
    BS EN 15400-2011 Solid Recycled Fuel - Calorific value Test
    IS: 1350-1970 "Methods for the Determination of Coal and Coke"
    GJB5891.29-2006 "Test Methods for Pyrotechnic Agents" - Part 29 "Determination of Combustion and Explosion Heat - Constant Temperature Method"