Sub column

Gas detection tube series

Oxygen detection tube
  • Features
  • Range
  • Parameter
  • Adopt standard
  • 1, the principle and use method of the specific gas detection tube
    principle
    The basic measuring principle of CO, CO2, H2S, O2, SO2 and NH3 is linear colorimetric method, that is, the color of the tested gas is colored through the verification tube and the indicator glue, forming the color changing layer (chromatic column). The length of the chromatic layer is directly proportional to the concentration of the tested gas.
    2. Main technical parameters (see table)
    3, annex (each box)
    (1) a section of rubber tube; 3 x 5, length 20cm
    A piece of small grinding wheel
    4. Condition of storage and transportation
    This product should be kept in the cool and dry place, strictly prohibit sunlight, the preservation temperature is not more than 40 degrees, glass products, careful and light.
    5. Methods of use
    All kinds of calibrating tubes can be used with the cylinder type positive pressure sampler for CZY-50 type gas verification pipe.
    To determine the site with air flush sampler, a certain volume of air field, the test tube ends with a short cut, a lower end of the hose pipe test (concentration scale with the "0" end) connected to the sampler (detector) outlet, according to the prescribed time uniform through verification tube, and then press the test tube color column (or color ring) is indicative of the number, directly read% of the concentration of measured gas.
  • The measurement range of gas detection tube can be processed according to customer's requirements.
  • 检测管名称 型号 化学分子式 测定范围 反应前后 颜色变化 采样体积 （mL） 送气时间 （秒） 有效期 (年)
    氧气 一 O2 0.5-21% 白色→茶色 30 60 3
Copyright: Hebi City Huanuo Electron Science and Technology Co.,Ltd